CONFIG_IDF_TARGET="esp32c5"

# libsodium
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y

# NIMBLE
CONFIG_BT_ENABLED=y
CONFIG_BT_NIMBLE_ENABLED=y
CONFIG_BT_NIMBLE_EXT_ADV=n
CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=n

# Enable OpenThread
CONFIG_OPENTHREAD_ENABLED=y
CONFIG_OPENTHREAD_SRP_CLIENT=y
CONFIG_OPENTHREAD_DNS_CLIENT=y
CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC=n
CONFIG_OPENTHREAD_LOG_LEVEL_NOTE=y
CONFIG_OPENTHREAD_CLI=n

# Disable lwip ipv6 autoconfig
CONFIG_LWIP_IPV6_AUTOCONFIG=n

# Use a custom partition table
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"

# This example use 3 dynamic endpoints: RootNode, light, and secondary network commissioning
CONFIG_ESP_MATTER_MAX_DYNAMIC_ENDPOINT_COUNT=3

# LwIP config for OpenThread
CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
CONFIG_LWIP_MULTICAST_PING=y

# MDNS platform
CONFIG_USE_MINIMAL_MDNS=n
CONFIG_ENABLE_EXTENDED_DISCOVERY=y

# Enable OTA Requestor
CONFIG_ENABLE_OTA_REQUESTOR=y

# Disable AP
CONFIG_ENABLE_WIFI_STATION=y
CONFIG_ENABLE_WIFI_AP=n

# Button
CONFIG_BUTTON_PERIOD_TIME_MS=20
CONFIG_BUTTON_LONG_PRESS_TIME_MS=5000

# Enable chip shell
CONFIG_ENABLE_CHIP_SHELL=y

# ESP32-C5-DevKitC-1 Settings
# Buttons
CONFIG_BSP_BUTTONS_NUM=1
CONFIG_BSP_BUTTON_1_TYPE_GPIO=y
CONFIG_BSP_BUTTON_1_GPIO=28
CONFIG_BSP_BUTTON_1_LEVEL=0
# LEDs
CONFIG_BSP_LEDS_NUM=1
CONFIG_BSP_LED_TYPE_RGB=y
CONFIG_BSP_LED_RGB_GPIO=27
CONFIG_BSP_LED_RGB_BACKEND_RMT=y

# Firmware size optimization
CONFIG_COMPILER_OPTIMIZATION_SIZE=y
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT=y
CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS=y
CONFIG_NEWLIB_NANO_FORMAT=y
CONFIG_ESP_ERR_TO_NAME_LOOKUP=n

# Set endpoint id for Thread and Wi-Fi, depending on the secondary network interface endpoint id.
CONFIG_THREAD_NETWORK_ENDPOINT_ID=2
CONFIG_WIFI_NETWORK_ENDPOINT_ID=0